Aiming at the high-speed impact characteristics of fuze pressure sensor when the percussion of the projectile
according to the requirement of developing fuze pressure sensor
the method of anti-ballistic simulation was adopted to design a suit of performance measuring device.It could dynamically calibrate and simulate the process of collision between the projectile and the targets at the different angles and speeds.The device can measure the technological performance of normal sensors and special sensors for war industry.
关键词
Keywords
references
刘广玉.传感器的现状和未来[J].测控技术,1999,18(3):16-18.Liu Guangyu.The state of the art and the future of sensors[J].Measurement and Control Technology,1999,18(3):16-18.(in Chinese)
石庚辰.关于开展引信传感器研究的若干问题[J].现代引信,1995:15.
王伯雄.测试技术基础[M].北京:清华大学出版社,2003.
张文栋,马宝华,祖静.现代引信测试系统及其宏观设计原理[J].测试技术学报,1994.
马宝华.引信构造与作用[M].北京:国防工业出版社,1983.
肖峰,高德香,方向君.高压传感器动态校准的理论分析与实践[J].测试技术学报,1994:69.
朱明武,李永新.高压动态标定的进展[J].测试技术学报,1995,9(2):32-38.Zhu Mingwu,Li Yongxin.The progress of dynamic calibration technology of high pressure measurement[J].Jour-nal of Test and Measurement Technique,1995,9(2):32-38.(in Chinese)