Analysis of Cam Curve for AK630 Gatling Naval Gun

徐健; 薄玉成; 李强; 常学芳

您当前的位置：

首页 >

文章列表页 >

Analysis of Cam Curve for AK630 Gatling Naval Gun

更新时间：2026-09-14

- Analysis of Cam Curve for AK630 Gatling Naval Gun
- AK630转管舰炮凸轮曲线分析
- Issue 2, Pages: 109-112(2008)
- 作者机构：
  
  中北大学机电工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2008
- 稿件说明：
移动端阅览
徐健, 薄玉成, 李强, et al. Analysis of Cam Curve for AK630 Gatling Naval Gun[J]. 2008, (2): 109-112.
DOI：

徐健, 薄玉成, 李强, et al. Analysis of Cam Curve for AK630 Gatling Naval Gun[J]. 2008, (2): 109-112. DOI：

摘要

从离散数据点入手

得到了AK 630舰炮理论凸轮曲线.该凸轮曲线没有后直线段

斜直线段较短

经分析该布局可以极大地减小机心组最大加速度

从而节省机心组功耗;在导出火药气体能量有限的情况下

能将更多的能量输出到供弹系统中.同时

由于将更多的角度分配到进弹过程中

可以降低推弹速度

保证推弹的可靠性.因此

该布局可为高射速转管武器设计提供参考.

Abstract

The theoretic cam curve of AK630 Gatling naval gun was obtained from the analysis of discrete points.It is found that the curve has no rear dwell section and the inclined straight line is short.The layout can reduce the maximum acceleration of the bolt groups and save the bolt group's power consumption.In addition under the conditions of the limited energy of educed powder gas

more energy can be exported to the feed systems.At the same time

because it allots more angles to the feed course

the feed velocity is reduced and the feed safety is ensured.Thus the analysis can provide some reference to the design of high fire rate weapon.

关键词

Keywords

references

同济大学数学教研室.高等数学.上册[M].北京:高等教育出版社,1997:392-396.

戴成勋,朵英贤,靳天佑.自动武器设计新编[M],北京:国防工业出版社,1990:81-108.

Amara C,Han Xuli.Approximation of the curves by b-spline[J].Mathematical Theory and Application,2002,22(3):40-43.

Qiu Hua,Lin Changjun,Li Ziye,et al.A universal optimal approach to cam curve design and its application[J].Mechanism and Machine Theory,2005,40:669-692.

Views

242

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

转管机枪凸轮曲线设计

Research of Decay Laws of Surface Soil at Different Dynamic Compaction Methods

加速度计输出信号的信息组成

Failure Mechanical Analysis of Crystal Oscillator under High g Acceleration

Design of Parallel Robot Experimental Platform Based on Reconfigurable Innovative Components

Related Author

刘绍奎

张清

薄玉成

韩云山

董彦莉

王元龙

段伟

杨明

Related Institution

华北工学院机械电子工程系

中北大学理学院

华北工学院理学系

华北工学院电子工程系

⁰