Effects of Y on Microstructure and Mechanical Properties of As-cast AZ31 Magnesium Alloy

张金旺; 许并社

您当前的位置：

首页 >

文章列表页 >

Effects of Y on Microstructure and Mechanical Properties of As-cast AZ31 Magnesium Alloy

更新时间：2026-09-14

- Effects of Y on Microstructure and Mechanical Properties of As-cast AZ31 Magnesium Alloy
- Y对AZ31镁合金铸态组织和性能的影响
- Vol. 30, Issue 2, Pages: 192-196(2009)
- 作者机构：
  
  1. 太原经济技术开发区
  2. 教育部新材料界面与工程重点实验室
  3. 太原理工大学材料科学与工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2009
- 稿件说明：
移动端阅览
张金旺, 许并社. Effects of Y on Microstructure and Mechanical Properties of As-cast AZ31 Magnesium Alloy[J]. 2009, 30(2): 192-196.
DOI：

张金旺, 许并社. Effects of Y on Microstructure and Mechanical Properties of As-cast AZ31 Magnesium Alloy[J]. 2009, 30(2): 192-196. DOI：

摘要

采用真空熔炼炉制备AZ31Y镁合金

观察其微观组织

对析出相进行分析

并着重讨论了提高其力学性能的途径.结果表明

Y在AZ31镁合金中主要以块状Al2Y化合物形式存在;高熔点的Al2Y在合金凝固过程中首先析出

成为凝固的异质形核剂

从而细化了合金组织

改善了室温和高温力学性能;由于Y的强化

含Y AZ31镁合金平均晶粒尺寸降低幅度约为35.82%;室温抗拉强度、屈服强度和延伸率分别为212MPa

147 MPa和7.5%

200℃时分别为117 MPa

98 MPa和10.2%.

Abstract

AZ31 magnesium alloy was prepared in vacuum melting furnace.The alloy's microstructure and mechanical properties were studied

and precipitation phase was analyzed in a way to improve the alloy's mechanical properties.The results show that yttrium(Y) exists as the form of compound(Al2Y) in AZ31 magnesium alloy

and dystectic Al2Y as the heteromorphic nucleation emerges firstly in the course of alloy precipitation

which refines the alloy's microstructure and obviously improves the mechanical properties at room and high temperature.The average grain size of AZ31 magnesium alloy containing Y is reduced by 35.82%.Tensile strength

yield strength and elongation percentage reach 212 MPa

147 MPa

and 7.5% at room temperature respectively

and 117 MPa

98 MPa

and 10.2% at 200 ℃ respectively.

关键词

Keywords

references

Benedyk Joseph C.Magnesium advances in automotive applications[J].Light Metal Age,2005,63(3):36.

Maeng D Y,Kim T S.Microstructure and strength of rapidly solidified and extruded Mg-Zn alloys[J].Scriptamater,2000,43:385.

Watanabe H.Realization of high-strain-rate superplasticity at low temperatures in a Mg-Zn-Zr alloy[J].MaterialsScience and Engineering,2001,A307:119.

Luo A A.Recent magnesium alloy development for elevated temperature applications[J].International MaterialsReviews,2004,49(1):13-30.

Apps P J,Karimzadeh H,King J F,et al.Precipitation reactions in magnesium-rare earth alloys containing Yttrium[J].Gadolinium or Dysprosium,2003,48(3):1023-1028.

李忠盛,潘复生,张静.AZ31镁合金的研究现状和发展前景[J].金属成形工艺,2004,22(1):54-57.Li Zhongsheng,Pan Fusheng,Zhang Jing.Present research status and development prospect of AZ31 magnesiumalloy[J]Metal Forming Technology,2004,22(1):54-57.(in Chinese)

Baghni I M,Wu Yinshun.Mechanical properties and potential applications of magnesium alloys[J].Transactions ofNonferrous Metals Sociey of China(English Edition),2003,13(6):1253-1259.

长崎诚三,平林真.二元合金状态图集[M].北京:冶金工业出版社,2004:98.

钟皓,张慧,翁文凭,等.热挤压工艺对AZ31镁合金组织与力学性能的影响[J].金属热处理,2006,31(8):79-82.Zhong Hao,Zhang Hui,Weng Wenping,et al.Effect of hot extrusion on microstructure and mechanical propertiesof AZ31 magnesimn alloy[J].Heat Treatment of Metals,2006,31(8):79-82.(in Chinese)

刘正,张奎,曾小勤.镁基轻质合金理论基础及其应用[M].北京:机械工业出版社,2002:25.

肖代红,宋日文,陈康华,等.Er对铸态Mg-Al-Zn-Mn合金组织与力学性能的影响[J].特种铸造与有色合金,2007(11):165-169.Xiao Daihong,Song Wen,Chen Kanghua,et al.Effects of erbium addition on microstructure and mechanicalproperties of as-cast Mg-AI-Zn-Mn magnesium alloys[J].Special Casting and Nonferrous Alloys,2007(11):165-169.(in Chinese)

Wu G H,Fan Y,Gao Y H,et al.The effect of Ca and rare earth elements on the microstructure,mechanicalproperties and corrosion behavior of AZ91D[J].Materials Science and Engineering A,2005,408:255-263.

张俊善.材料强度学[M].哈尔滨:哈尔滨工业大学出版社,2004.

Views

313

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of Solution Aging Treatment on the Microstructure and Properties of TC4 Titanium Alloy

Effect of Thermal Insulation Treatment on Interfacial Microstructure of Additive Forging for 2024 Aluminum Alloy

Study on Performance of Fly Ash-Metakaolin Base Geopolymer Concrete

二胺/TDI体系聚氨酯弹性体耐热性能的研究

碳纳米管/高密度聚乙烯复合薄膜的结构与性能研究

Related Author

ZHAO Yuhong

GUO Yumo

DONG Ruifeng

LI Jiaxiang

YAN Xiaokun

BA Zhonghui

ZHANG Xinyu

WANG Jianqiang

Related Institution

School of Materials Science and Engineering， North University of China

MOE Jointly Collaborative Innovation Center for High-Performance Al/Mg Based Materials， North University of China

Shanxi Key Laboratory of Intelligent Casting and Advanced Forming for New Materials， North University of China

Beijing Advanced Innovation Center for Materials Genome Engineering， University of Science and Technology Beijing

Shenyang National Laboratory for Materials Science， Institute of Metals Chinese Academy of Sciences

⁰