Yu Hailiang,Liu Xianghua,Wang Chao,et al.Analysis of roll gap pressure in sendzimir mill by FEM[J].Journalof Iron and Steel Research International,2008,15(1):30-33.

Liu Xianghua,Shi Xu,Li Shanqing,et al.FEM analysis of rolling pressure along strip width in cold rolling process[J].Journal of Iron and Steel Research International,2007,14(5):22-26.

王新洲,付兴,时旭,等.四辊轧机辊系压扁的有限元分析[J].塑性工程学报,2006,13(6):83-86.Wang Xinzhou,Fu Xing,Shi Xu,et al.FEM analysis for roll flattening in thin strip rolling[J].Journal of PlasticityEngineering,2006,13(6):83-86.(in Chinese)

谢红飙,肖宏,张国民,等.显示动力学有限元法分析板宽对板带轧制压力分布的影响[J].塑性工程学报,2003,10(1):61-66.Xix Hongbiao,Xiao Hong,Zhang Guomin,et al.Analysis of strip rolling pressure distribution for different width byexplicit dynamic FEM[J].Journal of Plasticity Engineering,2003,10(1):61-66.(in Chinese)

Yuan Siyu,Zhang Liwen,Liao Shulun,et al.3D FE analysis of thermal behavior of billet in rod and wire hotcontinuous rolling process[J].Journal of Iron and Steel Research International,2007,14(1):29-32.

Guo Zhongfeng,Li Changsheng,Xu Jianzhong,et al.Analysis of temperature field and thermal crown of roll duringhot rolling by simplified FEM[J].Journal of Iron and Steel Research International,2006,13(6):27-30.

Yu Hailiang,Liu Xianghua,Zhao Xianming,et al.Explicit dynamic FEM analysis of multipass vertical-horizontalrolling[J].Journal of Iron and Steel Research International,2006,13(3):26-30.

Jiang Z Y,Tieu A K,Zhang X M.Finite element simulation of cold rolling of thin strip[J].Journal of MaterialsProcessing Technology,2003,140:542-547.

刘立忠,刘相华,王国栋.轧制过程的显式动力学有限元模拟[J].东北大学学报,2001,22(3):327-330.Liu Lizhong,Liu Xianghua,Wang Guodong.Simulation on the strip rolling by dynamic explicit FEM[J].Journal ofNortheastern University,2001,22(3):327-330.(in Chinese)

赵丽丽,张以都.基于MSC的板材冷轧残余应力分布的数值仿真[J].有色金属,2005,57(1):27-29.Zhao Lili,Zhang Yidu.Residual stress numerical simulation of cold rolling board based on MSC[J].NonferrousMetals,2005,57(1):27-29.(in Chinese)

刘华,杨荃,何安瑞.张力对大宽厚比铝箔板形的影响[J].塑性工程学报,2005,12(4):62-65.Liu Hua,Yang Quan,He Anru.Influence of tension on Aluminum foil profile under large width to thickness ratio[J].Journal of Plasticity Engineering,2005,12(4):62-65.(in Chinese)

徐致让,薛家国.四辊轧机辊形变形分析的有限元方法[J].力学与实践,2000,22(5):22-27.Xu Zhirang,Xue Jiaguo.Finite element method for the analysis of rolls deflection for 4-high mill[J].Mechanics inEngineering,2000,22(5):22-27.(in Chinese)

孙林,张清东,陈先霖,等.中板轧机板形控制性能的研究[J].钢铁,2002,37(1):34-38.Sun Lin,Zhang Qingdong,Chen Xianlin,et al.Research on profile and flatness control characteristics of plate mill[J].Iron and Steel,2002,37(1):34-38.(in Chinese)

时旭,刘相华,王国栋,等.四辊冷轧机轧辊弯曲和压扁变形的有限元分析[J].东北大学学报,2004,25(10):957-960.Shi Xu,Liu Xianghua,Wang Guodong,et al.FEM analysis for roll deformation of a 4-high cold strip mill[J].Journal of Northeastern University,2004,25(10):957-960.(in Chinese)

陈火红.Marc有限元实例分析教程[M].北京:机械工业出版社,2002:1-11.