Elastic Modulus Measurement of Strand Wire Using Digital Image Correlation
|更新时间:2026-09-14
|
Elastic Modulus Measurement of Strand Wire Using Digital Image Correlation
数字图像相关测量钢绞线的弹性模量
Vol. 31, Issue 4, Pages: 409-413(2010)
作者机构:
华南理工大学土木与交通学院
作者简介:
基金信息:
DOI:
CLC:
Published:2010
稿件说明:
移动端阅览
张蕊, 贺玲凤. Elastic Modulus Measurement of Strand Wire Using Digital Image Correlation[J]. 2010, 31(4): 409-413.
DOI:
张蕊, 贺玲凤. Elastic Modulus Measurement of Strand Wire Using Digital Image Correlation[J]. 2010, 31(4): 409-413.DOI:
Elastic Modulus Measurement of Strand Wire Using Digital Image Correlation
摘要
利用数字图像相关方法(Digital Image Correlation
DIC)
测定了钢绞线的拉伸弹性模量.采用CCD及其计算机处理系统
采集不同载荷下钢绞线的数字图像.对所采集的系列数字图像进行相关运算获得位移
用线性平面拟合位移场获得平均应变
用最小二乘线性回归拟合应力-应变曲线
从而确定了钢绞线的弹性模量
并与机械式引伸计测试结果作比较
结果吻合较好.可见数字图像相关方法为钢绞线的弹性模量检测提供了新途径.
Abstract
Digital image correlation method(DIC) was employed to measure the elastic modulus of strand wire under tension.Images of the strand wire surface were captured by CCD and corresponding computer system under different loading.DIC was subsequently used to obtain displacement by correlation operation
then the average strain was obtained by fitting the displacement as a plane.The slope of each set of applied stress versus measured strain data was calculated by least-squares linear regression.So the elastic modulus was determined from the slope and compared with the result from extensometer.Both results were in good agreement.Test and analytic results show clear evidence of the feasibility and advantages of DIC in elastic modulus of strand wire measurement
which indicates that DIC is a new approach to test the elastic modulus of strand wire.
关键词
Keywords
references
赵清澄.光测力学教程[M].北京:高等教育出版社,1996.
潘兵,谢惠民,续伯钦,等.应用数字图像相关方法测量缺陷试样的全场变形[J].实验力学,2007,22(3-40):379-384.Pan Bin,Xie Huimin,Xu Boqin,et al.Full-field deformation measurement of specimen with discontinuity usingdigital image correlation[J].Experimental Mechanics,2007,22(3-40):379-384.(in Chinese)
Huang Y H.Optical strain gauge vs.traditional strain gauges for concrete elasticity modulus determination[J].Optik-International Journal for Light and Electron Optics,2009,120(3):2.
Pan B,Xie H M,Hua T,et al.Measurement of coefficient of thermal expansion of films using digital imagecorrelation method[J].Polymer Testing,2009,28:75-83.
Sutton M A,Turner J L,Bruck H A,et al.Full-field representation of discretely sampled surface deformation fordisplacement and strain analysis[J].Exp.Mech.,1991,31(2):168-77.
Peters W H,Ranson W F.Digital imaging techniques in experimental stress analysis[J].Opt.Eng.,1982,21(3):427-431.
Tong W.An evaluation of digital image correlation criteria for strain mapping applicant[J].Strain,2005,41(4):167-175.
Zhang Dongsheng,Luo Miao,Arola D.Displacement/Strain measurements using an optical microscope and digitalimage corelation[J].Optical Engineering,2006,45(3):33605.
Pan B,Asundi A,Xie H M,et al.Digital image correlation using iterative least squares and pointwise least squaresfor displacement field and strain field measurements[J].Optics and Lasers in Engineering,2009,47(7-8):865-874.
Dowling N E.Mechanical Behavior of Materials[M].2nd ed.Prentice Hall,1998.