Finte Element Analysis for Hole Defects Reinforcement of Wind Turbine Blade Root

周伟华; 瞿金平; 曹人靖

您当前的位置：

首页 >

文章列表页 >

Finte Element Analysis for Hole Defects Reinforcement of Wind Turbine Blade Root

更新时间：2026-09-14

- Finte Element Analysis for Hole Defects Reinforcement of Wind Turbine Blade Root
- 风力机叶片根部孔缺陷补强的有限元分析
- Vol. 33, Issue 4, Pages: 408-411(2012)
- 作者机构：
  
  1. 广东明阳风电产业集团有限公司
  2. 华南理工大学机械与汽车工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012
- 稿件说明：
移动端阅览
周伟华, 瞿金平, 曹人靖. Finte Element Analysis for Hole Defects Reinforcement of Wind Turbine Blade Root[J]. 2012, 33(4): 408-411.
DOI：

周伟华, 瞿金平, 曹人靖. Finte Element Analysis for Hole Defects Reinforcement of Wind Turbine Blade Root[J]. 2012, 33(4): 408-411. DOI：

摘要

风力机复合材料叶片在生产过程中难免出现各种加工质量问题.以1.5 MW根部T型螺栓孔打孔损伤叶片为例

提出了打孔错误叶片根部的修补方案

建立了修补后叶片根部的有限元模型.对叶片根部的修补方案进行三维有限元应力分析

得到修补后叶跟和T型螺栓的应力分布.比较修补前后的应力情况

发现修补后缺陷区域的最大拉应力变化不大

而剪应力减小的幅度较大

螺栓的最大拉应力略有降低.结果表明

通过修补后

缺陷区域的应力状态有所改善.

Abstract

Various quality problems inevitably occurre during manufacturing of wind turbine composite blades.A 1.5 MW wind turbine blade which had a defect hole at root was taken as an example.The reinforcement plan was proposed

and the FE model of the reinforced blade root was investigated by ANSYS.The 3D distribution of stress of blade root and T-bolts was obtained.It was found that the maximum tensile stress almost unchanged

the shear stress decreased more in the defect zone than the maximum tensile stress of T-bolts.The results show that the stress state in the defect zone has improved through the reinforcement.

关键词

Keywords

references

王炳雷,李树虎,陈以蔚.FRP在大型风力发电机叶片中的应用[J].工程塑料应用,2008,36(4):76.Wang Binglei,Li Shuhu,Chen Yiwei.Application of FRP in blade for large wind turbine[J].Engineering Plastic Application,2008,36(4):76.(in Chinese)

陈绍杰,申振华,徐鹤山.复合材料与风力机叶片[J].玻璃钢/复合材料,2008(2):42-46.Chen Shaojie,Shen Zhenhua,Xu Heshan.Composites and wind turbine blades[J].Fiber Reinforced Plastics/Composites,2008(2):42-46.(in Chinese)

靳交通,周鹏展.大型水平轴式风电叶片的结构设计[J].可再生能源,2009,27(2):65-68.Jin Jiaotong,Zhou Pengzhan.The structure design of large-scale horizontal axis wind turbine blade[J].Renewable Energy Resources,2009,27(2):65-68.(in Chinese)

高会焕.纤维增强材料风机叶片发展概述[J].玻璃钢/复合材料,2009,207(4):104-108.Gao Huihuan.Overview of the development for fiber reinforce composite wind turbine blade[J].Fiber Reinforced Plastics/Composites,2009,207(4):104-108.(in Chinese)

李成良,陈淳.风力机叶片的结构分析与铺层优化设计[J].玻璃钢/复合材料,2009,209(6):50-53.Li Chengliang,Chen Chun.Structural analysis and lamination optimum design of Wind turbine rotor blade[J].Fiber Reinforced Plastics/Composites,2009,209(6):50-53.(in Chinese)

李成良,王继辉,薛忠民,等.基于ANSYS的大型风力机叶片建模研究[J].玻璃钢/复合材料,2009(2):52-54.Li Chengliang,Wang Jihui,Xue Zhongmin,et al.Blades modeling study of large-scare wind turbine based on ANSYS[J].Fiber Reinforced Plastics/Composites,2009(2):52-54.(in Chinese)

Bechly M E,Clausen P D.Structural design of acomposite wind turbine blade using finite element analysis[J].Computer&Structures,1997,63(3):639-646.

田会方,曾琴琴,黄超.风力机叶片设计与建模[J].机械制造,2009,47(3):6-8.Tian Fanghui,Zeng Qinqin,Huang Chao.Design and modeling of wind turbine blades[J].Machinery,2009,47(3):6-8.(in Chinese)

陈余岳.玻璃钢风力机叶片根端连接设计[J].风力发电,1990(3):41-45.Chen Yuyue.Connection design of FRP wind turbine rotor blade root[J].Windpower,1990(3):41-45.(in Chinese)

潘燕环,徐加初,王王番,等.风力发电机叶片根部的有限元建模研究[J].中北大学学报(自然科学版),2010,31(4):429-432.Pan Yanhuan,Xu Jiachu,Wang Fan,et al.Finite element modeling of wind turbine blade root[J].Journal of North University of China(Natural Science Edition),2010,31(4):429-432.(in Chinese)

Views

130

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Thermal⁃Solid Coupling Numerical Analysis of Projectile Penetrating Concrete Target

Finite Element Analysis of Stress Transfer of Fiber-Thin Wall Structure

Research on Response Theory and Simulation Method of Accelerometer Under High Impact

股骨有限元建模及相应的生物力学分析

Study on the Ultrasonic Adsorption of Cr（Ⅵ） in Water by Tea Biochar Magnetic Materials

Related Author

ZHANG Dongmei

MA Xudong

LI Shizhong

JIA Baofeng

ZHAO Ziliang

HE Long

CHANG Huizhu

郭涛

Related Institution

School of Mechanical and Electrical Engineering, North University of China

Unit of PLA

Inner Mongolia First Machinery Group Co., Ltd.

中北大学仪器科学与动态测试教育部重点实验室

中北大学电子测试技术国家重点实验室

⁰