Schattenburgml.The critical role of metrology in nanotechnology[C].SPIE,2002,46(8):116-224.

Dai Gaoliang,Pohlenz F,Danzebrink H U,et al.Improving the performance of interferometers in metrologicalscanning probe microscopes[J].Measurement Science Technology,2004,15(3):444-450.

Topcu S,Chassagne L,Haddad D,et al.Heterodyne interferometric technique for displacement control at thenanometric scale[J].Review of Scientific Instruments,2003(11):4876-4880.

Rothschild M,Fort A R,Mark W,et al.193 nm lithography[J].IEEE Jouranal of Selected Tomcs in QuantemElectronics,1995,1(3):916-923.

王云飞.气体润滑理论与气体轴承设计[M].北京:机械工业出版社,1999.

徐萍.浅谈如何提高机械加工精度[J].甘肃冶金,2009,31(6):93-94.Xu Ping.How to improve the machining accuracy[J].Gansu Metallurgy,2009,31(6):93-94.(in Chinese)

Timoshenko S P.History of strength of materials[M].Canada:General Publishing Compang,Ltd.1983.

江传君.结构计算问题的力学方法分析[J].安徽建筑工业学院学报(自然科学版),2004,12(2):23-24.Jiang Chuanjun.The analysis on mechanical method of structure compute problems[J].Journal of Anhui Institute ofArchitecture&Industry,2004,12(2):23-24.(in Chinese)

李圣怡.超精密加工技术与机床的新进展[J].航空精密制造技术,2009,45(2):26-28.Li Shengyi.Ultra-precision machining technology and the new development of machine tools[J].Avition PrecisionManufacturing Technology,2009,45(2):26-28.(in Chinese)

图仕捷,胡超.浅谈中国机床的创新发展[J].中国制造业信息化,2009,2(68):1-3.Tu Shijie,Hu Chao.The brief discussion of the innovative development of machine tools[J].ManufactureInformation Engineering of China,2009,68(2):1-3.(in Chinese)

简金辉,焦锋.超精密加工技术研究现状及发展趋势[J].机械研究与应用,2009(1):4-8.Jian Jinhui,Jiao Feng.Progresses and trends in researches on ultra-precision machining technology[J].MechanicalResearch&Application,2009,(1):4-8.(in Chinese)

徐登峰,朱煜,尤政,等.空气轴承提高气浮系统稳定性的阻尼技术[J].纳米技术与精密工程,2010,8(1):84-89.Xu Dengfeng,Zhu Yu,You Zheng,et al.Improving damping capacity of the aerostatic bearing[J].Nanotechnology and Precision Engineering,2010,8(1):84-89.(in Chinese)

齐乃明,陶家生,关英姿,等.气浮导轨误差均化作用探讨[J].哈尔滨工业大学学报,1997,29(1):61-63.Qi Naiming,Tao Jiasheng,Guan Yingzi,et al.Research on aerostatic slideway error balance[J].Journal of HarbinInstitute Technlogy,1997,29(1):61-63.(in Chinese)

杨洪涛,刘勇,费业泰,等.三坐标测量机气浮导轨引起的动态误差[J].沈阳工业大学学报,2011,33(1):74-78.Yang Hongtao,Liu Yong,Fei Yetai,et al.Dynamic error generated by air-bearing guide of coordinate measuringmachine[J].Journal of Shenyang University of Technology,2011,33(1):74-78.(in Chinese)

杜旭超,胡鹏浩,陶壹.精密导轨运动特性实验装置设计[J].黑龙江科技学院学报,2007,17(6):443-447.Du Xuchao,Hu Penghao,Tao Yi.Experiment device design of precision guide movement characteristics[J].Journal of Heilongjiang Institute of Science and Technology,2007,17(6):443-447.(in Chinese)

党根茂.气体润滑技术[M].南京:东南大学出版社,1990.

叶树亮,李东升.应用有限体积法研究空气静压导轨力学特性[J].光学精密工程,2008,16(5):809-814.Ye Shuliang,Li Dongsheng.Study on mechanical characteristics of aerostatic bearing with finite volume method[J].Optics and Precision Engineering,2008,16(5):809-814.(in Chinese)

张家玮,周世军.恒载效应对拱形梁自振频率的影响分析[J].振动与冲击,2009,28(8):163-167.Zhang Jiawei,Zhou Shijun.Analysis on efect of dad lads on natural frequencies of arch beams[J].Journal ofVibration and Shock,2009,28(8):163-167.(in Chinese)

胡建兵,周云飞,朱红光,等.基于单边驱动的精密气浮工作台之振动分析与抑制[J].机床与液压,2004(6):19-21.Hu Jianbing,Zhou Yunfei,Zhu Hongguang,et al.A study analysis and suppression strategies of vibration for thehigh precision air-bearing work-stage under the drive of one-side mode[J].Machine Tool&Hydraulics,2004(6):19-21.(in Chinese)

刘俭,谭久彬,赵晨光.基于特征谱信号抑制的气膜刚度测量技术[J].光电子.激光,2008,19(7):938-941.Liu Jian,Tan Jiubin,Zhao Chenguang.Gas film stiffness measurement based on characteristics spectrum signalinhibition[J].Journal of Optoelectronics.Laser,2008,19(7):938-941.(in Chinese)