Study on Characteristics of Arm-Type Rammer

曲振森; 薄玉成; 王惠源; 苏高峰; 原珏

您当前的位置：

首页 >

文章列表页 >

Study on Characteristics of Arm-Type Rammer

更新时间：2026-09-14

- Study on Characteristics of Arm-Type Rammer
- 臂式输弹机构特性研究
- Vol. 33, Issue 2, Pages: 117-120(2012)
- 作者机构：
  
  1. 中北大学机电工程学院
  2. 中国兵器工业第202研究所
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012
- 稿件说明：
移动端阅览
曲振森, 薄玉成, 王惠源, et al. Study on Characteristics of Arm-Type Rammer[J]. 2012, 33(2): 117-120.
DOI：

曲振森, 薄玉成, 王惠源, et al. Study on Characteristics of Arm-Type Rammer[J]. 2012, 33(2): 117-120. DOI：

摘要

介绍了臂式输弹机构的结构及工作原理

通过对输弹机构的运动学分析

推导出输弹机输弹臂末端的速度方程

得到了输弹机构输弹臂末端的速度特性曲线.通过建立输弹机的虚拟样机并进行仿真

得到输弹臂末端与弹丸的速度及位移曲线

综合对输弹机构工作特性的分析

得出输弹机构工作时摆臂的最佳转角为90°的结论.

Abstract

The structure and working principle of arm-type rammer was described

through kinematics analysis of the ramming

the velocity equations of the end of transmission arm and the velocity characteristic curve were obtained.The virtual prototypes of the rammer were established and simulated

and velocity and the displacement curve of the end of transmission-arm and the shell were got.Through the comprehensive analysis of the working characteristic of the feed transfer mechanism

it is concluded that swing arm′s best rotating angle should be 90° on rammer's working.

关键词

Keywords

references

梁辉,马春茂,潘江峰,等.大口径火炮弹药自动装填系统研发现状和趋势[J].火炮发射与控制学报,2010(3):103-107.Ling Hui,Ma Chunmao,Pan Jiangfeng,et al.Current situation and development trend of autoloaderin large caliber howitzer[J].Journal of Gun Launch&Control,2010(3):103-107.(in Chinese)

赵森,钱勇.自行火炮半自动装填机构输弹问题研究[J].兵工学报,2005(5):592-594.Zhao Sen,Qian Yong.Ammunition ramming of semiautomatic loading device of the self-propelled gun[J].Acta Armamentarii,2005(5):592-594.(in Chinese)

徐达,林海,王东军.大口径顶置火炮输弹机动力学研究[J].装甲兵工程学院学报,2006(2):34-36.Xu Da,Lin Hai,Wang Dongjun.Research into dynamics of the large-caliber,top-mounted gun ram mechanism[J].Journal of Academy of Armored Force Engineering,2006(2):34-36.(in Chinese)

Nordmann A,Germany H.Rammer for projectiles:united states,3,938,421[P].Foreign Application Priority Data,1976:2-13.

李宗海.中大口径双管火炮自动装填系统方案研究[D].南京:南京理工大学,2009.

樊永生,余红英.某自行火炮自动装填系统供弹机运动学分析[J].华北工学院学报(自然科学版),1999,20(3):269-273.Fan Yongsheng,Yu Hongying.The kinematics analysis of the ammunition supplying mechanism in the autoloading system of a self-ropelled gun[J].Journal of North China Institute of Technology(Natural Science Edition),1999,20(3):269-273.(in Chinese)

哈尔滨工业大学理论力学研究室.理论力学(I)[M].北京:高等教育出版社,2002.

郑文纬,吴克坚.机械原理[M].北京:高等教育出版社,1997.

袁文武,蔡慧林.基于UG和ADAMS的齿轮啮合动力学仿真[J].煤矿机械,2010,31(2):40-42.Yuan Wenwu,Cai Huilin.Dynamic simulation of gear mesh based on UG and ADAMS[J].Coal Mine Machinery,2010,31(2):40-42.(in Chinese)

高海龙,吴晓,李振华,等.柔性齿轮的多体动力学仿真方法研究[J].制造业自动化,2009(10):103106.Gao Hailong,Wu Xiao,Li Zhenhna,et al.Study on multi-body dynamics simulation of flexible gears[J].Manufacturering Autormation,2009(10):103-106.(in Chinese)

李增刚.ADAMS入门详解与实例[M].北京:国防工业出版社,2009.

陈立平.机械系统动力学分析及ADAMS应用教程[M].北京:清华大学出版社,2005.

洪清泉.基于ADAMS的多级齿轮传动系统动力学仿真[J].北京理工大学学报,2003(12):690-693.Hong Qingquan.Dynamic simulation of multistage gear train system in ADAMS[J].Transactions of Beijing Institute of Technology,2003(12):690-693.(in Chinese)

李伟,王兴贵,黄泽平.输弹机虚拟样机建模与动态仿真[J].火炮发射与控制学报,2006(6):29-32.Li Wei,Wang Xinggui,Huang Zeping.Modeling and dynamic simulation analysis for virtual prototype of rammer[J].Journal of Gun Launch&Control,2006(6):29-32.(in Chinese)

李继科.火炮供输弹系统虚拟样机技术研究[D].南京:南京理工大学,2004.

Views

117

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Configuration Design and Research of a Hybrid Quadruped Perilla Sowing Robot

冗余驱动并联机构的性能特征及应用研究进展

串联机器人运动学分析与研究

Research and Design on State Feedback Compensation Controller Based on Relative Degree

High-Power Semiconductor Laser Equivalent Circuit Model with Parasitic Parameter

Related Author

Han Xiying

Song Guojiang

Wang Ruixue

Tian Baojun

宁峰平

张启升

亢书华

李瑞琴

Related Institution

Human Resources Department， North University of China

School of Mechanical Engineering， North University of China

Intelligent Manufacturing Engineering College， Shanxi University of Electronic Science and Technology

中北大学机械工程学院

福建省高校机器人工程研究中心

⁰