骆宇飞,濮波,徐诚.大威力低后坐狙击步枪系统发射动力特性[J].弹道学报,2010,22(3):39-42.Luo Yufei,Pu Bo,Xu Cheng.Launch dynamic char-acteristic of high-power sniper rif le with low recoil[J].Journal of Ballistics,2010,22(3):39-42.(inChinese)

李永建,李鹏,安洁.大口径狙击步枪自适应液压缓冲器设计[J].液压与气动,2006(10):67-69.Li Yongjian,Li Peng,An Jie.The design of hy-draulic buffer for big caliber sniper rifle with adaptivecontrol[J].Hydraulics and Pneumatics,2006(10):67-69.(in chinese)

王刚,姚养无,张伟.反器材步枪应用弹簧液压缓冲器理论分析[J].华北工学院学报,2003(3):227-229.Wang Gang,Yao Yangwu,Zhang Wei.Theoreticalanalysis of low recoil technology of anti-materiel rifles[J].Journal of North China Institute of Technology,2003(3):227-229.(in chinese)

戴劲松,刘振,王茂森,等.高频冲击作用下高阻尼气液缓冲装置动态仿真[J].火炮发射与控制学报,2012(1):22-25.Dai Jinsong,Liu Zhen,Wang Maosen,et al.The dy-namic simulation for high damping factor pneumatic-hydraulic precision buffer under the effect of high fre-quency shocks[J].Journal of Gun Launch&Control,2012(1):22-25.(in Chinese)

高树滋,陈运生,张月林,等.火炮反后坐装置设计[M].北京:兵器工业出版社,1995.

黄运华,李芾,付茂海,等.新型铁道车辆液气缓冲器动态特性[J].交通运输工程学报,2005,5(4):1-5.Huang Yunhua,Li Fu,Fu Maohai,et al.Dynamiccharacteristic of new hydro-pneumatic buffer for rail-way vehicle[J].Journal of Traffic and TransportationEngineering,2005,5(4):1-5.(in Chinese)

李芾,黄运华,卜继玲,等.新型液气缓冲器在铁道车辆上的应用研究[J].铁道车辆,2005,43(12):20-22.Li Fu,Huang Yunhua,Piao Jiling,et al.Research onapplication of new hydraulic pneumatic draft gears onrolling stock[J].Rolling Stock,2005,43(12):20-22.(in Chinese)

苗明,李明月,杨万春.新型液气缓冲器的动态试验及其仿真分析[J].机械工程学报,2006,42(1):212-216.Miao Ming,LI Mingyue,Yang Wanchun.Dynamictest and simulation to the new model of hydraulic-gapbuffer[J].Chinese Journal of Mechanical Engineer-ing,2006,42(1):212-216.(in Chinese)

林玮,苗明.液气缓冲器节流阀的参数优化[J].起重运输机械,2007(8):33-36.Lin Wei,Miao Ming.Parameterized optimization ofthrottle for gas-hydraulic buffer[J].Hoisting andConveying Machinery,2007(8):33-36.(in Chinese)

黄运华,李芾,廖小平,等.机车车辆液气缓冲器特性研究[J].铁道学报,2005,27(5):31-35.Huang Yunhua,Li Fu,Liao Xiaoping,et al.Re-search on characteristics of the hydro-pneumaticbuffer for locomotives and vehicles[J].Journal of theChina Railway Society,2005,27(5):31-35.(inChinese)

何忠韬.套缸式液气缓冲器结构参数设计方法[J].液压气动与密封,2010(11):19-21.He Zhongtao.Design method for structural parame-ters of telescopic cylindrical type hydro-pneumaticbuffer[J].Hydraulics Pneumatics&Seals,2010(11):19-21.(in Chinese)

何忠韬.列车套缸式液气缓冲器缓冲能量计算方法[J].液压气动与密封,2010(12):25-27.He Zhongtao.Calculation method for cushioning en-ergy of telescopic cylindrical type hydro-pneumaticbuffer in train[J].Hydraulics Pneumatics&Seals,2010(12):25-27.(in Chinese)

周政,何忠韬.一种新型液气缓冲器能量吸收率的计算[J].液压气动与密封,2010(7):22-24.Zhou Zheng,He Zhongtao.Calculating the energyabsorption rate of a new hydraulic-gas buffer[J].Hydraulics Pneumatics&Seals,2010(7):22-24.(inChinese)

梁冠华,李芾,黄运华.基于MATLAB的液气缓冲器调车冲击特性分析[J].铁道机车车辆,2009,29(4):15-17.Liang Guanhua,Li Fu,Huang Yunhua.Analysis ondynamic characteristics of the hydro-pneumaticbuffer based on MATLAB[J].Railway Locomotive&amp,Car,2009,29(4):15-17.(in Chinese)

杨海威,詹永麒,乔俊伟,等.基于结构的神经网络在液压缓冲器建模中的应用[J].上海交通大学学报,2003,37(5):741-744.Yang Haiwei,Zhan Yongqi,Qiao Junwei,et al.Ap-plication of architecture-based neural network inmodeling of hydraulic bumper[J].Journal of Shang-hai Jiaotong University,2003,37(5):741-744.(inChinese)

周政,何忠韬.多孔式液气缓冲器单自由度动力学分析[J].铁道车辆,2011,49(5):11-13.Zhou Zheng,He Zhongtao.The dynamics analysis ofsingle degree of freedom on porous hydro-pneumaticbuffers[J].Rolling Stock,2011,49(5):11-13.(inChinese)