Application Investigation of Different Turbulent Models on High Pressure Intake Flows in CI Engine

尤国栋; 苏铁熊; 徐春龙; 王增全

您当前的位置：

首页 >

文章列表页 >

Application Investigation of Different Turbulent Models on High Pressure Intake Flows in CI Engine

更新时间：2026-09-14

- Application Investigation of Different Turbulent Models on High Pressure Intake Flows in CI Engine
- 柴油机高压进气流动模拟中的湍流模型应用研究
- Vol. 33, Issue 4, Pages: 416-419(2012)
- 作者机构：
  
  1. 中北大学机电工程学院
  2. 中国北方发动机研究所
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2012
- 稿件说明：
移动端阅览
尤国栋, 苏铁熊, 徐春龙, et al. Application Investigation of Different Turbulent Models on High Pressure Intake Flows in CI Engine[J]. 2012, 33(4): 416-419.
DOI：

尤国栋, 苏铁熊, 徐春龙, et al. Application Investigation of Different Turbulent Models on High Pressure Intake Flows in CI Engine[J]. 2012, 33(4): 416-419. DOI：

摘要

针对柴油机功率密度提高后

进气流动马赫数增大导致严重的流动分离现象

采用k-ε和k-ζ-f湍流涡粘度模型

对U型通道内的气流的运动进行了数值模拟.结果显示k-ζ-f湍流模型能更有效地捕捉到分离流动现象.建立了等效进气门模型

应用三维CFD技术模拟了进气流动速度场

与PIV试验结果对比表明

k-ζ-f模型能更准确地表征进气流动的旋涡和流动分离现象.选择k-ζ-f湍流模型对柴油机直进气道在高压差进气条件下的流量系数进行了模拟

与试验结果吻合良好.

Abstract

With the technical trend of high-power density of diesel engine

the high Mach number intake flow results in the serious flow separation.With k-ε and k-ζ-f turbulent eddy viscosity models

U-shape pipe flow experiment

k-ζ-f model can identify the flow separation more effectively.With the established intake valve model

3D CFD simulation is applied to simulate the flow of intake valve field.The comparison with PIV experiment results shows that

k-ζ-f model can simulate the intake vortex and flow separation with higher accuracy.With k-ζ-f models

the intake process of diesel direct intake with high-pressure drop is calculated.The intake discharge is in good agreement with the experiment.

关键词

Keywords

references

Kosaka T.Development of high power density smallDI diesel engine for agricultural and industrial use[C].SAE Paper,2001.

Sono H,Shibata M.A study of high power outputdiesel engine with low peak cylinder pressure[C].SAE Paper,2010.

Catania A,Finesso R,Spessa E.Diagnostics ofmixing process dynamics,combustion and emissionsin a euro V diesel engines[C].SAE Paper,2011.

Iwanaga W,Yamato T,Kosaka T,et al.Development of new industrial high power densitydiesel engines[C].SAE Paper,2006.

张卫正,原彦鹏.高功率密度柴油机设计问题的仿真[J].兵工学报,2006,27(5):775-778.Zhang Weizheng,Yuan Yanpeng.Numericalsimulation analysis of HPD diesel engine[J].ActaArmamentarii,2006,27(5):775-778.(in Chinese)

王海刚,刘石.不同湍流模型在内燃机缸内流动过程数值模拟中的应用和比较[J].燃烧科学与技术,2004(2):66-71.Wang Haigang,Liu Shi.Application and comparisonof different turbulent models with computations of in-cylinder turbulent flows in ICE[J].Journal ofCombustion Science and Technology,2004(2):66-71.(in Chinese)

lmberdis O.A numerical and experimentalinvestigation of a DISI-engine intake port generatedturbulent flow[C].SAE Paper,2007.

刘晶,解茂昭.燃机缸内湍流流动的数值模拟-三种k-ε模型的比较[C].成都:中国内燃机学会燃烧净化分会学术年会论文集,2007:1-6.

王福军.计算流体力学分析-CFD软件原理与应用[M].北京:清华大学出版社,2005.

Renberg U.A comparative study between 1D and 3Dcomputational results for turbulent flow in anexhaust manifold and in bent pipes[J].SAE Paper,2009.

Kim M,Park J C,Lim J W.Numerical simulationon the raindrop transportation in the turbulent flowfield of the heavy-duty intake system[C].SAEPaper,2006.

Dong M,Xie M.Numerical study on turbulent two-phase flow in a porous media combustion chamber[C].SAE Paper,2008.

Ogoreve T,Sekavenik M,Katrasnik T,et al.Three-dimensional numerical simulation of the exhauststroke of a single-cylinder four-stroke ICE[J].Forsch Ingenieurwes,2009,73:147-160.

Durbin P A.Separated flow computations with the k-ε-υ2model[J].AIAA Journal,1995,33(4):659.

Hanjalic K,Popovac M,Hadziabdic M.A robustnear-wall elliptic-relaxation eddy-viscosityturbulence model for CFD[J].International Journalof Heat and Fluid Flow,2004,25(6):1047-1051.

Views

144

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on the Structural Optimization of Cylindrical-Spherical Lacking Composite Liner

一类社交网络中受媒介影响的信息传播动力学模型分析与最优控制

隔板结构参数对EFP成型的影响

High⁃Precision Photoeletric Coordinate Positioning Technology Based on Transformer⁃FPGA Collaborative Feature Modeling

机器人机构设计与控制专栏

Related Author

白晶

张国伟

李岩

胡先艳

雷文博

任亚鑫

薛亚奎

袁俊明

Related Institution

中北大学环境与安全工程学院

武汉科技大学理学院

中北大学数学学院

中北大学超重力化工过程山西省重点实验室

中国科学院过程工程研究所湿法冶金与清洁生产技术国家工程实验室

⁰