王世清.深孔加工技术[M].西安:西北工业大学出版社,2003.

杜云芝.钻削过程的塑性有限元数值模拟[D].天津:天津大学,2006.

张永强,罗红波,唐才学,等.基于ANSYS的套料钻模态分析[J].工具技术,2009,43(5):55-57.Zhang Yongqiang,Luo Hongbo,Tang Caixue,et al.Modal analysis on trepanning drill based on ANSYS[J].Tool Engineering,2009,43(5):55-57.(in Chi-nese)

王玲君.深孔钻削刀具系统的设计理论与试验研究[D].太原:中北大学,2012.

高兴军,李萍.基于Deform-3D不锈钢钻削机理的仿真研究[J].工具技术,2011,45(4):17-20.Gao Xingjun,Li Ping.Simulation of stainless steeldrilling mechanism based on Deform-3D[J].Tool En-gineering,2011,45(4):17-20.(in Chinese)

胡凤兰,刘军安,魏华.深孔钻削中的孔轴线偏斜机理与控制方法[J].现代制造工程,2011(7):73-77.Hu Fenglan,Liu Junan,Wei Hua.On the mechanismand controlling methods of axial deviation in deep-hole drilling[J].Modern Manufacturing Engineering,2011(7):73-77.(in Chinese)

Richardson R,Bhatti A R.Review of research intothe role of guide pads in BTA deep-hole machining[J].Journal of Materials Processing Technology,2001,110(1):61-69.

张伟,张平宽.基于Deform的硬铝轴向振动钻削仿真[J].装备制造技术,2011(1):20-21.Zhang Wei,Zhang Pingkuan.Axial vibration drillingmachining simulation of 2A12 based on Deform[J].Equipment Manufacturing Technology,2011(1):20-21.(in Chinese)

Pujana J.Analysis of ultrasonic-assisted drilling ofTi6Al4V[J].International Journal of Machine Tools&Manufacture,2009,49:500-508.

江庆辉.利用枪钻法进行深孔钻削[J].机械工人,2004(6):46-48.