细晶ZrO<sub>2</sub>陶瓷超声振动磨削表面特征试验研究

丁爱玲; 吴雁; 王洪福; 刘永姜

您当前的位置：

首页 >

文章列表页 >

细晶ZrO₂陶瓷超声振动磨削表面特征试验研究

机械与动力工程 | 更新时间：2026-09-14

- 细晶ZrO₂陶瓷超声振动磨削表面特征试验研究
- Experimental Research on Surface Features for Fine-Crystalline ZrO₂ Ceramic after Two-Dimensional Ultrasonic Vibration Grinding
- 中北大学学报（自然科学版） 2010年31卷第2期页码：104-107
- 作者机构：
  
  1. 中北大学机械工程与自动化学院
  2. 上海应用技术学院机械与自动化工程学院
- 作者简介：
- 基金信息：
  
  山西省青年基金资助项目(2006021026);上海市教委重点学科建设项目(J51501)
- DOI：
  中图分类号：
- 纸质出版：2010
- 稿件说明：
移动端阅览
丁爱玲, 吴雁, 王洪福, 等. 细晶ZrO₂陶瓷超声振动磨削表面特征试验研究[J]. 中北大学学报（自然科学版）, 2010,31(2):104-107.

丁爱玲, 吴雁, 王洪福, et al. Experimental Research on Surface Features for Fine-Crystalline ZrO₂ Ceramic after Two-Dimensional Ultrasonic Vibration Grinding[J]. 2010, 31(2): 104-107.
丁爱玲, 吴雁, 王洪福, 等. 细晶ZrO₂陶瓷超声振动磨削表面特征试验研究[J]. 中北大学学报（自然科学版）, 2010,31(2):104-107. DOI：

丁爱玲, 吴雁, 王洪福, et al. Experimental Research on Surface Features for Fine-Crystalline ZrO₂ Ceramic after Two-Dimensional Ultrasonic Vibration Grinding[J]. 2010, 31(2): 104-107. DOI：

摘要

进行了细晶ZrO2陶瓷二维超声振动磨削表面微观特征试验研究.应用原子力显微镜和扫描电镜分析了磨削表面微观特性.试验结果表明:同样磨削条件下

二维超声振动磨削表面峰谷较均匀

磨削表面均匀一致性优于普通磨削表面

二维超声振动磨削更易于实现塑性域磨削.分析表明:二维超声振动磨削单颗磨粒的切削运动轨迹状态和单颗磨粒与工件的接触状态是影响二维超声振动磨削表面质量的主要因素.磨削表面粗糙度实验表明:相同磨削条件下

材料的力学性能也是影响陶瓷磨削表面质量的重要因素之一.

Abstract

Experimental research on surface quality of fine-crystalline ZrO2 ceramic were carried out by using 270# diamond wheel both with and without workpiece two-dimension ultrasonic vibration grinding(WTDUVG).By AFM and SEM images

the surface topography and the micro structure of the two-dimensional ultrasonic vibration grinding ceramics were especially analyzed.Experiments indicate that: the surface quality with WTDUVG is superior to that of the conventional grinding

it is easier to achieve ductile mode grinding for two dimensional ultrasonic vibration grinding.Analysis shows that the motion model of the contact between abrasive particle and workpiece and the grain cutting locus in WTDUVG are the main factors affecting the surface quality.Experiments of grinding surface roughness indicate that the mechanical properties of ceramics are one of the effects on the surface quality too.

关键词

Keywords

references

Shamoto E,Moiwaki T.Elliptical vibration cutting[J].Annuals of CIRP,1994,43(1):35-38.

Brinksmeier E.Elliptical vibration cutting of steel with diamond tools[C].In:Proc.of 14th Annals ASPE Meeting,USA,1999(S):163-166.

Shamoto E,Suzuki N.Ultraprecision machining of hard materials by applying ultrasonic elliptical vibration cutting[J].Frontiers Science Series,2003,40:195-202.

Zhao B,Wu Y,Liu C S,et al.The study on ductile removal mechanisms of ultrasonic vibration grinding nano-ZrO2ceramics[J].Key Engineering Material,2006,304-305:171-175.

Zhao Bo,Wu Yan.Experimental research on surface integrity of ceramic nanocomposites in workpiece two-dimen-sional ultrasonic vibration grinding[J].Key Engineering Material,2007,329:445-451.

吴雁,孙爱国,刘永姜,等.二维超声振动磨削机理与试验研究[J].中北大学学报,2007(6):486-490.Wu Yan,Sun Aiguo,Liu Yongjiang,et al.Experimental studies on grinding mechanism of fine-crystalline ZrO2ce-ramics in two dimensional ultrasonic vibration grinding[J].Journal of North University of China,2007(6):486-490.(in Chinese)

浏览量

174

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

微纳米复相陶瓷超声振动磨削表面微观特性的试验研究

变截面细长杆超声波振动车削技术

智能功率超声源

超重力强化氢氧化钾耦合甘氨酸钾溶液脱除密闭空间CO2的研究

基于元学习与VAE⁃GAN的META⁃VAEGAN⁃DNN网络入侵检测方法

细晶ZrO2陶瓷超声振动磨削表面特征试验研究

Experimental Research on Surface Features for Fine-Crystalline ZrO2 Ceramic after Two-Dimensional Ultrasonic Vibration Grinding

DOI：

摘要

Abstract

关键词

Keywords

references

细晶ZrO₂陶瓷超声振动磨削表面特征试验研究

Experimental Research on Surface Features for Fine-Crystalline ZrO₂ Ceramic after Two-Dimensional Ultrasonic Vibration Grinding