
浏览全部资源
扫码关注微信
1. 北京理工大学光学工程系
2. 中北大学信息与通信工程学院
纸质出版:2009
移动端阅览
郝利华, 王涌天, 宋文爱. 固体火箭发动机药柱超声缺陷特征研究[J]. 中北大学学报(自然科学版), 2009,30(6):610-615.
郝利华, 王涌天, 宋文爱. Grain Defect Character of Solid Rocket Motor in Ultrasonic Test[J]. 2009, 30(6): 610-615.
通过对固体火箭发动机药柱材料黏弹性的分析决定了超声检测探头的最佳频率为1 MHz.采用双探头脉冲反射法
综合了穿透法和脉冲反射法的优点
实现了超声信号在固体火箭发动机药柱中传播时能量强衰减的情况下超声回波信号幅值的最优化.利用超声缺陷信号的时频域特征
较好地实现了该类型药柱的线性定量无损检测.
The ultrasonic test probe with the frequency of 1MHz is optimal by analyzing viscoelastic property of material of solid rocket motor grain.The double-probe pulse echo method
combining the advantages of transmission technique and pulse reflection method
is used to optimize the ultrasonic echo signal amplitude in case of strong attenuation of energy when ultrasonic signal transmitting in solid rocket motor grain.The linear and quantitative nondestructive test of the grain defect is realized by using time-frequency domain character of the ultrasonic defect signal.
郝利华,王涌天.装药缺陷对固体发动机性能影响的实验分析[J].测试技术学报,2009,23(3),217-220.Hao Lihua,Wang Yongtian.Experimental study on effects of grain with defects on solid rocket motor[J].Journal ofTest and Measurement Technology,2009,23(3),217-220.(in Chinese)
袁华,王召巴.复合材料的多界面脱粘检测技术的研究[J].机械工程与自动化,2008(6):118-119.Yuan Hua,Wang Zhaoba.Research on the testing technology of interfacial debonding of multilayered compositematerials[J].Mechanical Engineering&Artomation,2008(6):118-119.(in Chinese)
许萌萌.固体火箭发动机界面脱粘裂纹分析[J].固体火箭技术,2008,31(2),121-124.Xu Mengmeng.Analysis on interfacial debond crack of SRM[J].Journal of Solid Rocket Technology,2008,31(2):121-124.(in Chinese)
罗斯J L,固体中的超声波[M].北京:科学出版社,2005.
杨月诚,张宁,强洪夫,等.固体火箭发动机卧式贮存状态界面应力数值分析[J].上海航天,2007(3):50-53.Yang Yuecheng,Zhang Ning,Qiang Hongfu,et al.Interface stress analysis of SRM under horizontal storage state[J].Aerospace Shanghai,2007(3):50-53.(in Chinese)
冯若.超声手册[M].南京:南京大学出版社,2006.
0
浏览量
203
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621