
浏览全部资源
扫码关注微信
1. 广东省建筑设计研究院
2. 暨南大学理工学院重大工程灾害与控制教育部重点实验室
纸质出版:2010
移动端阅览
方芳, 王璠. 生物骨圆柱壳的蠕变屈曲分析[J]. 中北大学学报(自然科学版), 2010,31(4):364-368.
方芳, 王璠. Creep Buckling Analysis of Biologic Bone in the Form of Cylindrical Shell[J]. 2010, 31(4): 364-368.
将生物胫骨考虑为纤维增强的粘弹性复合材料圆柱壳
并进行了蠕变屈曲分析.采用广义Maxwell模型
提出了胫骨的粘弹性复合材料圆柱壳力学模型
得到了受轴向载荷作用粘弹性圆柱壳的蠕变屈曲控制方程.通过Laplace变换
将控制方程转换到相空间
在相空间中得到临界荷载的表达式;经过Laplace逆变换
得到了随时间变化的屈曲荷载曲线.最后依据具体的人胫骨粘性系数
对人胫骨轴压屈曲压力进行计算和分析比较
得到了蠕变屈曲临界载荷曲线
给出了蠕变屈曲荷载随胫骨长度及时间的变化曲线.研究结果表明:将胫骨考虑为纤维增强的粘弹性复合材料圆柱壳其瞬时临界荷载值、持久临界荷载值均小于将该胫骨考虑为功能梯度圆柱壳的屈曲荷载.
Based on the analysis to macroscopic structure and microscopic structure of the bone
the shinbone was considered as cylindrical shell with viscoelastic and anisotropical character and the creep buckling analysis had been done.By introducing Maxwell model
the mechanical model of cylindrical shell on viscoelastic composite material was established.The creep buckling control equation of viscoelastic composite cylindrical shell under axially load was given.Based on Laplace-transform
the control equation was transformed into phase space
in which the critical load expression was obtained.Followed by inverse Laplace-transform
the time-dependent creep load curve was obtained.Finally
according to the viscosity coefficient of human shinbone
the axial buckling load was calculated and analyzed
the creep buckling critical load curve obtained.The variation curves of creep buckling load to the length of the shinbone and the time were figured.The results show that the shinbone is considered for fiber-reinforced viscoelastic composite cylindrical shell
its instantaneous critical load value and lasting critical load value are less than the buckling critical load values considering the shinbone as functionally graded cylindrical shell load.
刘人怀,王王番.浅谈我国生物力学的研究近况[J].暨南大学学报(自然科学版),2001,22(1):59-61.Liu Renhuai,Wang Fan.Survey of recent reseach on biomechanics in China[J].Journal of Jinan University(NaturalScience Edition),2001,22(1):59-61.(in Chinese)
冯元桢.生物力学[M].长沙:湖南科技出版社,1986.
杨桂通,吴文周.骨力学[M].北京:科学出版社,1989.
李国琛.圆柱壳体的轴压蠕变屈曲[J].力学学报,1981(1):38-48.Li Guocheng.Creep buckling of circular shells under axial compression[J].Acta Mechanica Sinica,1981(1):38-48.(in Chinese)
Miyazaki N,Hagihara H,Munakata T.Bifurcation creep buckling analysis of circular cylindrical shell under axialcompression[J].Pressure Vessel Piping,1992,52(1):1-10.
王颖坚,王震鸣.正交铺设层合圆柱曲板的蠕变失稳[J].应用数学与力学,1993,14(4):295-300.Wang Yingjian,Wang Zhenming.Creep buckling of cross-ply symmetric laminated cylindrical panels[J].AppliedMathematics and Mechanics,1993,14(4):295-300.(in Chinese)
彭凡,向红,傅衣铭.粘弹性层合圆柱壳的蠕变分岔屈曲[J].力学学报,2006,38(6):792-798.Peng Fan,Xiang Hong,Fu Yiming.Bifurcation creep buckling of viscoelastic laminated circular cylindrical shells[J].Chinese Joumal of Theoretical and Applied Mechanics,2006,38(6):792-798.(in Chinese)
张翘,武云涛,于涛,等.股骨颈松质骨的应力松弛方程[J].中国组织工程研究与临床康复,2009,13(2):272-276.Zhang Qiao,Wu Yuntao,Yu Tao,et al.Stress relaxation equation of femoral neck bone[J].Journal of ClinicalRehabilitative Tissue Engineering Research,2009,13(2):272-276.(in Chinese)
罗祖道,王震鸣.复合材料力学进展[M].北京:北京大学出版社,1992.
王王番,刘人怀.复合材料层合开顶扁球壳的非线性动态屈曲[J].固体力学学报,2001,22(3):309-314.Wang Fan,Liu Renhuai.Nonlinear dynamic buckling of symmetrically laminated truncated spherical shell[J].ActaMechanica Solida Sinica,2001,22(3):309-314.(in Chinese)
杨科,王王番.功能梯度圆柱壳的屈曲问题[J].中山大学学报,2008,47(sup.2):9-13.Yang Ke,Wang Fan.Buckling of functionally graded cylindrically shells[J].Journal of Zhong Shan University,2008,47(sup.2):9-13.(in Chinese)
Wang Fan,Wu Chuqun.Imitation bone optimization of composite pipe using trenchless technology[J].Journal ofMechanics and MEMS,2009(2):311-315.
0
浏览量
156
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621