立铣加工过程的三维有限元模拟

杜茂华; 李露露; 白玉峰; 王神送

您当前的位置：

首页 >

文章列表页 >

立铣加工过程的三维有限元模拟

机械与动力工程 | 更新时间：2026-09-14

- 立铣加工过程的三维有限元模拟
- 3D FEM Simulations of the End-Milling Process
- 中北大学学报（自然科学版） 2012年33卷第4期页码：397-402
- 作者机构：
  
  昆明理工大学机电工程学院
- 作者简介：
- 基金信息：
  
  校人才培养基金资助项目(KKZ3201001007)
- DOI：
  中图分类号：
- 纸质出版：2012
- 稿件说明：
移动端阅览
杜茂华, 李露露, 白玉峰, 等. 立铣加工过程的三维有限元模拟[J]. 中北大学学报（自然科学版）, 2012,33(4):397-402.

杜茂华, 李露露, 白玉峰, et al. 3D FEM Simulations of the End-Milling Process[J]. 2012, 33(4): 397-402.
杜茂华, 李露露, 白玉峰, 等. 立铣加工过程的三维有限元模拟[J]. 中北大学学报（自然科学版）, 2012,33(4):397-402. DOI：

杜茂华, 李露露, 白玉峰, et al. 3D FEM Simulations of the End-Milling Process[J]. 2012, 33(4): 397-402. DOI：

摘要

切削加工过程的模拟本质上是采用有限元方法求解非线性问题的过程

为了建立合理的金属切削有限元模拟模型

以实验中易于获得的45钢为研究对象

分析了材料本构关系、切屑与刀具间的摩擦、网格划分以及切屑分离准则等关键技术问题及其具体解决方法.利用软件ABAQUS建立了比以往直角和斜角切削更接近实际切削的热力耦合的45钢三维立铣有限元模型

动态模拟了其用高速钢刀具在常规速度下的铣削加工过程

得到了切屑形状及切削力各分量曲线并对其结果进行了分析

切削力模拟结果与实验结果有较好的一致性.研究说明

与实际加工过程相符的真正意义上的三维有限元模拟是可实现的

由此可对实际铣削加工中的切削力进行快捷的预测

并可进一步对合理切削工艺参数或刀具几何参数的确定提供依据.该研究也可拓展应用到其他材料切削过程的三维有限元模拟中.

Abstract

The simulation of the cutting process is substantially to use finite element method(FEM) to solve nonlinear problems.In order to establish a rational model of finite element simulation of metal cutting

45 steel available for experiments is selected as the workpiece's material

and several key technologies in FE modeling including the material constitutive equation

the friction situations between the chip and tool

meshing and chip separation criteria are focused.Three-dimensional(3D) end-milling finite element model of 45 steel

which is much superior to that of orthogonal or oblique cutting and considers thermo-mechanical coupling in software ABAQUS

is built.The milling processes of 45 steel with high-speed steel milling cutter at the conventional speeds are dynamically simulated

and the chip shape and cutting force component curves are obtained

which coincides with the experimental results under the same cutting conditions as the simulations.This suggests that 3D finite element simulations of cutting processes can be truly achieved

thus the cutting forces in practice can be rapidly predicted.Furthermore

this will be a basis of the determination of the reasonable machining parameters or tool geometric parameters.The method of this study can also be extended to the 3D FEM simulations of the mechnical cutting process of other materials.

关键词

Keywords

references

Johnson G R,Cook W H.A constitutive model and data for metals subjected to large strains,high strain rates and high temperature[C].The7th International Symposium on Ballistics,Hague,Netherlands,1983:541-547.

Liu C R,Guo Y B.Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer[J].InternationalJournal of Mechanical Sciences,2000,42(9):1069-1086.

Strenkowski J S,Moon K J.Finite element prediction of chip geometry and tool workpiece temperature distributions in orthogonal metal cutting[J].Eng Ind.,1990,112:313-318.

Zhang Liangchi.On the separation criteria in the simulation of orthogonal metal cutting using the finite element method[J].Journal of Materials Processing Technology,1999,88-89:273-278.

Lin Z C,Lin Y Y.Fundamental modeling for oblique cutting by thermo-elastic-plastic FEM[J].International Journal of Mechanicial Sciences,1999,41:941-965.

陈刚,陈忠富,徐伟芳,等.45钢的J-C损伤失效参量研究[J].爆炸与冲击,2007,27(2):131-135.Chen Gang,Chen Zhongfu,Xu Weifang,et al.Investigation on the J-C ductile fracture parameters of 45steel[J].Explosion and Shock Waves,2007,27(2):131-135(in Chinese)

杨勇,李长河,孙杰.钛合金Ti6AI4V铣削加工中切削力的三维数值模拟[J].应用基础与工程科学学报,2010,18(3):493-502.Yang Yong,Li Changhe,Sun Jie.Three-dimensional numerical simulation of cutting force during milling of titanium alloy Ti6AI4V[J].Journal of Basic Science and Engineeering,2010,18(3):493-502.(in Chinese)

Tandon P,Khan M R.Three dimensional modeling and finite element simulation of a generic end mill[J].Computer-Aided Design,2009,41:106-114.

Liu Gang.Study on deformation of titanium thin-walled part in milling process[J].Journal of Materials Processing Technology,2009,209:2788.

郑光明,赵军,宋新玉,等.陶瓷刀具切削镍基合的三维数值模拟[J].设计与研究,2010(3):4-10.Zheng Guang ming,Zhao Jun,Song Xinyu,et al.3-D numeriacl simulation on sialon ceramic inserts cutting inconel718[J].Design and Research,2010,3:4-10(in Chinese)

董辉跃.航空整体结构件加工过程的数值仿真[D].浙江:浙江大学,2004.

浏览量

303

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于Solid Works98三维模型切片软件研究开发

滚切端铣刀的切削力试验研究

一种消除向间干扰的新方法——关于标定车削测力仪

基于元学习与VAE⁃GAN的META⁃VAEGAN⁃DNN网络入侵检测方法

鱼类自主游动时摆频与摆幅的最优组合研究