CA法模拟各向异性和Gibbs-Thomson参数对枝晶生长的影响

张俊婷; 崔小朝; 王宥宏

您当前的位置：

首页 >

文章列表页 >

CA法模拟各向异性和Gibbs-Thomson参数对枝晶生长的影响

材料科学与工程 | 更新时间：2026-09-14

- CA法模拟各向异性和Gibbs-Thomson参数对枝晶生长的影响
- Effect of Anisotropy Coefficient and Gibbs-Thomson Coefficient on Dendrite Growth
- 中北大学学报（自然科学版） 2013年34卷第2期页码：204-207
- 作者机构：
  
  太原科技大学应用科学学院
- 作者简介：
- 基金信息：
  
  太原科技大学青年基金资助项目(20113021)
- DOI：
  中图分类号：
- 纸质出版：2013
- 稿件说明：
移动端阅览
张俊婷, 崔小朝, 王宥宏. CA法模拟各向异性和Gibbs-Thomson参数对枝晶生长的影响[J]. 中北大学学报（自然科学版）, 2013,34(2):204-207.

张俊婷, 崔小朝, 王宥宏. Effect of Anisotropy Coefficient and Gibbs-Thomson Coefficient on Dendrite Growth[J]. 2013, 34(2): 204-207.
张俊婷, 崔小朝, 王宥宏. CA法模拟各向异性和Gibbs-Thomson参数对枝晶生长的影响[J]. 中北大学学报（自然科学版）, 2013,34(2):204-207. DOI：

张俊婷, 崔小朝, 王宥宏. Effect of Anisotropy Coefficient and Gibbs-Thomson Coefficient on Dendrite Growth[J]. 2013, 34(2): 204-207. DOI：

摘要

基于溶质扩散和界面能的作用

考虑成分过冷、曲率过冷、界面能各向异性和界面扰动等因素

建立了单个枝晶的生长模型.应用该模型将有限体积法与元胞自动机相结合

对Al-4%wtCu合金的枝晶生长过程进行了计算机模拟研究.结果发现:界面能各向异性和Gibbs-Thomson参数对枝晶的形貌和生长速度有着重要影响

随着Gibbs-Thomson系数和各向异性强度的减小

枝晶臂沿优先生长方向出现分裂

且生长速度也随之减小.

Abstract

Based on the physical effect of solute diffusion and interfacial energy

a model for describing the growth of single equiaxed dendrite was established

including the factors of constitutional undercooling

curvature undercooling

anisotropy of interfacial energy and perturbation on the interface.Using this modeling approach combining the finite volume method and the cellular automata technique

the solidification of Al-4%wtCu alloys was simulated.The results show that the impact of anisotropy coefficient and Gibbs-Thomson coefficient for the morphologies of dendrite and the velocity of dendrite growth is important.With the decreasing of anisotropy intensity and Gibbs-Thomson coefficient

the growth velocity of the dendritic tip would be reduced

and the well known branching of finger would been observed.

关键词

Keywords

references

Yin H.Simulation of a dendritic microstructure with the lattice Boltzmann and cellular automaton methods[J].Acta Materialia,2011,59:3124-3136.

Haxhimali T.Orientation selection in dendritic evolution[J].Nature Materials,2006,5:660.

Udaykumar H S,Mao L.Sharp-interface simulation of dendritic solidification of solutions[J].International Journal of Heat and Mass Transfer,2002,45(24):4793-4808.

Jacot A,Rappaz M.A pseudo-front tracking technique for the modeling of solidification microstructures in multi-component alloys[J].Acta Materialia,2002,50(8):1909-1926.

Lee J S,Suzuki T.Numerical simulation of isothermal dendritic growth by phase-field model[J].ISIJ International,1999,39(3):246-252.

Dilthey U,Pavlik V.Numerical simulation of dendrite morphology and grain growth with modified cellular automata[C].Modeling of Casting,Welding and Advanced Solidification Processes VIII.Warrendale PA:TMS,1998:589-596.

Lazaro B S,Stefanescu D M.Growth of solutal dendrites:A cellular automaton model and its quantitative capabilities[J].Metallurgical and Materials Transactions,2003,A34(2):367-382.

Nastac L.Numerical modeling of solidification mor-phologies and segregation patterns in cast dendritic alloys[J].Acta Materialia,1999,47(17):4253-4262.

Lazaro B S,Stefanescu D M.A quantitative dendrite growth model and analysis of stability concepts[J].Metallurgical and Materials Transactions,2004,A35(8):2471-2485.

Zhu M F,Stefanescu D M.Virtual front tracking model for the quantitative modeling of dendritic growth in solidification of alloys[J].ActaMaterialia,2007,55(5):1741-1755.

陈晋.基于胞元自动机方法的凝固过程微观组织数值模拟[D].南京:东南大学,2005.

黄建峰.基于元胞自动机法的等轴枝晶生长数值模拟[J].材料热处理技术,2010,39(10):46-50.Huang Jianfeng.Numerical simulation on equiaxed dendritic grain growth based on cellular automation method[J].Material&Heat Treatment,2010,39(10):46-50.(in Chinese)

汪靓.基于有限体积法的Al-Cu合金中Cu枝晶生长过程模拟[J].特种铸造及有色合金,2011,31(8):706-709.Wang Liang.Numerical simulation on Cu dendritie growth in Al-Cu alloy based on cellular automation and finite volumetric method[J].Special Casting&Nonferrous Alloys,2011,31(8):706-709.(in Chinese)

Ihle T.Fractal and compact growth morphologies in phase transitions with diffusion transport[J].Physical Review E,1994,49(4):2972.

Akamatsu S,Faivre G,Ihle T.Symmetry-broken double fingers and seaweed patterns in thin-film directional solidification of a nonfaceted cubic crystal[J].Physical Review E,1995,51(5):4751.

Kurz W,Fisher D J.凝固原理[M].北京:高等教育出版社,2010.

浏览量

426

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

行人穿越马路对交通流的影响

基于可重构创新散件的并联机器人实验平台设计

鱼类自主游动时摆频与摆幅的最优组合研究

基于机器学习的复合材料结构设计与性能表征研究进展

机器人机构设计与控制专栏