With a MCU

a CPLD

and a FLASH memory as key components

a test system was designed for Doppler signal measurement of the millimeter wave fuse.The test system has been successfully applied to the experiments on boom

and recorded the Doppler signals of the terminal trajectory with the distance of 18 km and 10km respectively.According to the recorded curves

it can be concluded that the obtained Doppler signal is not a regular continuous amplitude-increasing signal but a fluctuant amplitude-increasing signal.By means of spectrum analysis

the main frequency of the Doppler signal is 70 kHz/89 kHz at each terminal trajectory(18 km/10 km).The analysis results can provide scientific basis for the design of the signal processing circuit on fuse.