嵌入钢壳的共形微带天线设计

王代华; 宋林丽; 苏尚恩; 张志杰

您当前的位置：

首页 >

文章列表页 >

嵌入钢壳的共形微带天线设计

电子与电子信息 | 更新时间：2026-09-14

- 嵌入钢壳的共形微带天线设计
- A Conformal Microstrip Antenna Embedded in Steel Shell
- 中北大学学报（自然科学版） 2012年33卷第4期页码：462-465
- 作者机构：
  
  1. 中北大学仪器科学与动态测试教育部重点实验室
  2. 中兵光电科技股份有限公司
- 作者简介：
- 基金信息：
  
  仪器科学与动态测试教育部重点实验室青年基金资助项目(2011YF003)
- DOI：
  中图分类号：
- 纸质出版：2012
- 稿件说明：
移动端阅览
王代华, 宋林丽, 苏尚恩, 等. 嵌入钢壳的共形微带天线设计[J]. 中北大学学报（自然科学版）, 2012,33(4):462-465.

王代华, 宋林丽, 苏尚恩, et al. A Conformal Microstrip Antenna Embedded in Steel Shell[J]. 2012, 33(4): 462-465.
王代华, 宋林丽, 苏尚恩, 等. 嵌入钢壳的共形微带天线设计[J]. 中北大学学报（自然科学版）, 2012,33(4):462-465. DOI：

王代华, 宋林丽, 苏尚恩, et al. A Conformal Microstrip Antenna Embedded in Steel Shell[J]. 2012, 33(4): 462-465. DOI：

摘要

针对安装空间受限且需要与安装壳体共形的需求

设计了一种工作于2.4 GHz频段的圆环形微带贴片天线.利用Ansoft HFSS软件建立了天线及其安装壳体的模型

通过仿真分析确定了天线的外形尺寸以及加载电阻的阻值.仿真结果表明:辐射贴片的外形尺寸与天线的谐振频率密切相关

尺寸增大会使谐振频率明显下降;增大加载电阻的阻值可有效降低天线的谐振频率;嵌入钢壳后天线的谐振频率提高了4.2%.利用矢量网络分析仪对天线嵌入钢壳后的特性进行了实测

测试结果与仿真结果吻合良好.

Abstract

Considering the requirements of limited mounting space and conformal structure

an annular ring microstrip patch antenna working in 2.4 GHz band was proposed.The antenna and its mounting shell were modeled by using the software of Ansoft HFSS

and the key parameters

such as the patch sizes and the resistance of loading resistor

were optimized by simulation.The simulated results indicate that the patch sizes have a great influence on the resonant frequency of the antenna

as the sizes increased

the resonant frequency decreased obviously.It is also found that the resonant frequency can be decreased when increasing the resistance of the loading resistor

and the resonant frequency increased by about 4.2% as the antenna embedded in the steel shell.The antenna with the steel shell was measured by using a vector network analyzer

and the measured results show good agreements with the simulated ones.

关键词

Keywords

references

陈雷,沈文辉,赵国华.新型小型化双频缝隙微带天线的设计[J].上海大学学报,2008,14(6):560-563.Chen Lei,Shen Wenhui,Zhao Guohua.Design of novel compact dual frequency microstrip slot antenna[J].Journal of Shanghai University,2008,14(6):560-563.(in Chinese)

房少军,聂国涛.新型电阻加载微带贴片天线[J].大连海事大学学报,2004,30(2):49-52.Fang Shaojun,Nei Guotao.Novel microstrip patch antenna[J].Journal of Dalian Maritime University,2004,30(2):49-52.(in Chinese)

栾秀珍,李永红,李春庚,等.短路针加载三角形微带贴片天线的研究[J].电子学报,2003,31(6):944-946.Luan Xiuzhen,Li Yonghong,Li Chungeng,et al.Research on triangular microstrip patch antenna loaded with a shorting pin[J].Acta Electronica Sinic,2003,31(6):944-946.(in Chinese)

任王.小型微带天线分析与设计[D].杭州:浙江大学,2008.

栾秀珍,谭克俊,房少军.多短路针加载小型微带贴片天线的理论分析[J].微波学报,2003,19(4):62-66.Luan Xiuzhen,Tan kejun,Fang Shaojun.Theoretical analysis of miniaturized microstrip patch antennas loaded with multiple shorted posts[J].Journal of Microwaves,2003,19(4):62-66.(in Chinese)

官伯然,曹建伟.一种小型超宽带微带天线[J].微波学报,2011,27(2):60-62.Guan Boran,Cao Jianwei.A small size ultra-wideband microstrip antenna[J].Journal of Microwaves,2011,27(2):60-62.(in Chinese)

荣丰梅,龚书喜,贺秀莲.利用开槽和短路探针加载减缩微带天线RCS[J].西安电子科技大学学报,2006,33(3):479-481.Rong Fengmei,Gong Shuxi,He Xiulian.Reducing the RCS of the microstrip antenna by cutting slots and loading a shorting-post[J].Journal of Xidian University,2006,33(3):479-481.(in Chinese)

李登丰.基于HFSS的圆极化微带天线的设计和仿真[J].齐齐哈尔大学学报,2011,27(6):37-40.Li Dengfeng.Design and simulation of circularly polarized microstrip antenna by HFSS[J].Journal of Qiqihar University,2011,27(6):37-40.(in Chinese)

Wong Kinlu.Compact and broadband microstrip antennas[M].Hoboken:John Wiley&Sons,2002.

浏览量

107

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

一种LoRa微带天线的小型化设计

一种对跖圆形的宽带共形阵列天线

基于Transformer⁃FPGA协同特征建模的光电坐标高精度定位技术

OFDM中基于DFT的自适应信道估计算法

茶叶生物炭磁性材料对水中重金属铬的超声吸附研究