合成酯在不锈钢轧制油中的润滑特性研究

武志平; 张旭; 王士庭

您当前的位置：

首页 >

文章列表页 >

合成酯在不锈钢轧制油中的润滑特性研究

材料科学与工程 | 更新时间：2026-09-14

- 合成酯在不锈钢轧制油中的润滑特性研究
- Study on Lubricating Properties of Synthetic Ester in Stainless Steel Rolling Oil
- 中北大学学报（自然科学版） 2013年34卷第2期页码：208-212
- 作者机构：
  
  1. 山西太钢不锈钢股份有限公司冷轧厂
  2. 中国石油化工股份有限公司润滑油研发上海中心
- 作者简介：
- 基金信息：
- DOI：
  中图分类号：
- 纸质出版：2013
- 稿件说明：
移动端阅览
武志平, 张旭, 王士庭. 合成酯在不锈钢轧制油中的润滑特性研究[J]. 中北大学学报（自然科学版）, 2013,34(2):208-212.

武志平, 张旭, 王士庭. Study on Lubricating Properties of Synthetic Ester in Stainless Steel Rolling Oil[J]. 2013, 34(2): 208-212.
武志平, 张旭, 王士庭. 合成酯在不锈钢轧制油中的润滑特性研究[J]. 中北大学学报（自然科学版）, 2013,34(2):208-212. DOI：

武志平, 张旭, 王士庭. Study on Lubricating Properties of Synthetic Ester in Stainless Steel Rolling Oil[J]. 2013, 34(2): 208-212. DOI：

摘要

合成酯作为不锈钢轧制油的主要添加剂

对轧制油的润滑性能有至关重要的影响.分别采用EL(十二酸乙酯)、MH(棕榈酸甲酯)、BS(硬脂酸丁酯)、DOA(己二酸二辛酯)、DOP(邻苯二甲酸二辛酯)、TOTM(偏苯三酸三辛酯)6种酯类化合物配制不锈钢轧制油

从摩擦学性能、退火性能、轧制工艺及轧后表面质量4个方面考察了不同合成酯对不锈钢轧制油润滑性能的影响.实验结果表明:合成酯的润滑性能随其碳链长度的增加而提高

但提高的效果随着碳链长度的增加而逐步减弱;二元、三元酯的润滑性能优于单元酯;合成酯的挥发温度随碳链长度的增加而增加;一定范围内

板带钢的轧后表面光亮度与轧制油的润滑性能成反向相关关系.

Abstract

As the main choice of oil additives in stainless steel rolling oil

synthetic ester has crucial effect on the performance of rolling oil.Six stainless steel rolling oils were prepared by using EL(Ethyl laurate)

MH(methyl hexadecanoate)

BS(n-Butyl stearate)

DOA(Dioctyl adipate)

DOP(Dioctyl phthalate)

and TOTM(Trioctyl trimellitate)

in order to investigate the application of different esters in stainless steel rolling oils on four aspects like tribological properties

annealing properties

rolling process and surface quality after rolling.The results show: The lubricating ability of rolling oil is improving with the increase of carbon-chain length

but the increase is gradually weakened with the increase of carbon-chain length;the lubricating performance of diester and tribasic ester is better than that of the single ester;the temperature of oils volatilization is improving with the increase of carbon-chain length.Within a certain range

the surface brightness of strip after rolling has a reverse relation with the oil’s lubricant performance.

关键词

Keywords

references

李学锋.太钢不锈钢冷轧板材质量、性能改进技术的分析[J].钢铁,2004,39(6):40-42.Li Xuefeng.Technical analysis for quality andproperties improvement of TISCO cold rolled stainlesssteel strips[J].Iron and Steel,2004,39(6):40-42.(in Chinese)

程挺宇.精密不锈钢带冷轧生产工艺[J].金属材料与冶金工程,2000,17(6):25.Cheng Tingyu.Cold rolling process of precisestainless steel strip[J].Metal Materials andMetallurgy Engineering,2000,17(6):25.(in Chinese)

单芳.不锈冷轧带钢生产工艺的最新发展[J].山西冶金,2004(1):20-23.Shan Fang.Up-date development of process in coldrolled stainless strip[J].Shanxi Metalurrgy,2004(1):20-23.(in Chinese)

张旭.不锈钢生产及其轧制油的发展[J].石油商技,2008,26(12):25-30.Zhang Xu.Production of stainless steel strips anddevelopment of rolling oil[J].Petroleum ProductsApplication Research,2008,26(12):25-30.(inChinese)

张旭,陈忠平.不锈钢冷轧轧制油工业应用[J].世界钢铁,2009,9(6):61-62.Zhang Xu,Cheng Zhongping.Industrial application ofstainless steel cold rolling oil[J].World Iron&Steel,2009,9(6):61-62.(in Chinese)

孙建林,刘杰,康永林,等.油粘度对冷轧不锈钢带表面粗糙度的影响[J].特殊钢,2002,23(5):15-16.Sun Jianlin,Liu Jie,Kang Yonglin,et al.Influence ofoil viscosity on surface roughness of cold rolling stripof stainless steel[J].Special Steel,2002,23(5):15-16.(in Chinese)

赵诚,单芳.不锈冷轧带钢表面光洁度的控制[J].特殊钢,2004,25(3):38-39.Zhao Cheng,Shan Fang.Control of surface degree offinish of cold rolled stainless steel strip[J].SpecialSteel,2004,25(3):38-39.(in Chinese)

Zhang Xu,Wang Shiting,Sun Jianlin,et al.Researchon lubricating properties of alcohol and ester instainless steel cold rolling process[J].AdvancedMaterials Research,2012,557-559:1427-1431.

Zhang Xu,Wang Yizhu,Yao Wenjing,et al.Development and lubricating properties of rolling oilfor stainless steel cold rolling[J].China Petroleumand Petrochemical Technology,2011,13(2):57.

浏览量

301

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

分光光度法测定不锈钢中镍含量的研究

5Cr15MoV马氏体不锈钢冷轧工艺研究

模拟海洋大气环境下304光亮不锈钢耐蚀性研究

面向高空爆炸试验的冲击波测试系统

基于递归图和MobileViT⁃AESTF的网络入侵检测模型